介绍一下OF里F16的内置无线电语音~ 从OF手册直接复制的:
The new radios now behave much more like the real thing and exceed any 3rd party voice comm software
out there in terms of flexibility, capability, controllability and realism. COM1 and COM2 (UHF and
VHF) both have 20 presets available to them and each preset can be assigned a valid frequency within its
respective band range.
UHF
The UHF band frequencies are from 225.000-399.975 MHz in 25 kHz stepping, just like the real thing.
Since 25 kHz stepping applies, the 5th digit of a 6-digit freq must end with 0, 2, 5, or 7 and the 6th digit
must end in 5 or 0. Examples of valid freqs: 371.075, 377.10, 271.6. Examples of invalid freqs: 339.11,
271.14. It should be noted that the pilot may only input freqs using 5 digits and he will only see 5 digits
in the Upfront Controls (UFC, i.e., the DED), but it is possible to assign preset freqs with 6 digits.
Although this capability will rarely be used, it is possible by using the DTC.
VHF
The VHF band frequencies are from (AM mode) 116.000-151.975 MHz in 25 kHz stepping. The FM
mode (30.000-87.975 MHz) is not implemented. The rules regarding digit input are the same as those
which apply to the UHF band.
一般我们连飞时除了和塔台联系要输入塔台频率外, 和同伴间通话都用preset channel~
真实战斗任务里的comm plan实在是非常的复杂.... |